Check GFCI Outlets

Tools needed

Materials needed

Time required

  • 1 hour

Cost

  • 0$ - 20$

Priority

  • High

Difficulty

  • Easy

Frequency

  • Quarterly

Primary location

  • Inside

Safety notes

  • Always use extreme caution working around electricity! Although nothing in this inspection should cause risk of shock, faulty wiring could lead to shock hazards. If you’re in doubt if a screw or wire is energized, don’t touch it! Call a professional.

Introduction

GFCI (Ground Fault Circuit Interrupter) outlets are designed to stop the flow of electricity in case of a ground fault, which is usually caused by dropping an electrical device into a wet area. These outlets are required by code and should be tested quarterly. 

Step by step

Ground fault shocks cause 300 deaths a year, many of which would be avoided with properly functioning GFCI (ground fault circuit interrupters) protection. GFCI outlets have been standard in homes since the 1980s. You’ll mostly see them around any wet areas such as bathrooms and kitchens and potentially wet areas such as basements and garages. These are designed to trip the flow of electricity off instantaneously if a connected appliance experiences a ground fault, usually caused by dropping the appliance in water.

The good news is that these are outlets are easily tested in one single step. Be sure to perform this task monthly and immediately address any issues.

  1. Check the GFCI outlets
    Get a lamp or voltage tester and plug it in to each GFCI outlet. Make sure the lamp comes on or the voltage tester indicates power. Now look for the ‘TEST” button on the outlet. Hit this and the lamp should turn off and the “RESET” button pop out. Push the “RESET” button back in and the lamp or tester should turn back on.

    If the outlet doesn’t turn off the lamp when you hit the “TEST” button you have a faulty GFCI outlet and are at risk! Mark this outlet as faulty and make plans to replace it immediately. Here’s a tutorial on how to replace a GFCI outlet. If you are not comfortable doing this yourself please contact a qualified electrician. 

  2. Mark Complete!
    We’ll also remind you to complete a more thorough electrical system test in November but this task is good for now.
Download

Want to get started maintaining your home but not sure where to start? Download our free PDF of a typical home maintenance plan!

 

For a plan customized to your own home, register for Propsee Premium. 

Install Smoke & CO Sensors

Having high quality smoke and carbon monoxide (CO) detectors installed in your home is a crucial safety item. We strongly urge you to complete this task immediately if you do not have one or both of these life saving devices installed properly in your home.

Read More

Inspect Electrical System

Electricity is a modern marvel, but it is also dangerous if not properly maintained. Completing an annual inspection of your home's electrical system will help avoid any issues and ensure your safety. 

Read More