Flush Tankless Water Heater

Tools needed

Materials needed

Time required

  • 2 hours

Cost

  • 10$ - 100$

Priority

  • High

Difficulty

  • Medium

Frequency

  • Annually

Primary location

  • Outside

Safety notes

  • Wear safety glasses as you’ll be dealing with hot water and vinegar under slight pressure.

    Be cautious opening valves as water will be scalding at 120+ degrees F. 

    As always, if you are not comfortable completing this task, please call a plumber. 

Introduction

Tankless water heaters are efficient and effective, but they require maintenance to ensure they do not build up scale. Flushing your tankless heater is a simple task, but it does take 1-2 hours to complete. For most water quality, completing this task once a year will suffice, but if you have especially hard water you may want to complete more often.

Step by step

Tankless hot water heaters are a great invention and are not only more efficient than their tank based counterpart, but also provide unlimited hot water for the users. Just like tank hot water heaters, tankless hot water heaters need to be flushed annually to ensure maximum life. Failure to flush your tankless hot water heater will lead to buildup of scale, which are hard mineral deposits, inside the unit. This corrodes the water heater’s interior system and can also flush downstream and stop up valves and aerators in your home. A simple annual maintenance goes a long way toward avoiding long-term problems!

The process for flushing a tankless water heater is different than a tank heater so let’s check a few things before you get started. First, make sure you have flush valves installed, if not, you’ll need to have a plumber install them before you can proceed. Also make sure you have a submersible pump, 5-gallon bucket, a set of washer/dryer hoses, and 3 gallons of standard white vinegar. Let’s get started! 

Below is a video from Matt Risinger showing how to complete this process. Be sure to subscribe to Matt's YouTube Channel for more information on building science and fine craftsmanship.



Prep Unit

  1. Check for Flush Valves
    Make sure your unit has a set of flush valves. These will look similar to a hose bib and have screw on caps. If you don’t have these, you’ll need to get them installed before proceeding. We recommend you hire a professional plumber for this task. 

  2. Turn off the Gas or Electric
    Turn off the gas supply to the unit using the inline valve. If you have an electric unit, use the disconnect or breaker.


  3. Turn off the Water & Open the Flush Valves
    Turn off the cold and hot water valves entering and leaving the unit. Then remove the caps and open the flush valves.


  4. Clean the Filter
    Clean the inline filter, if applicable. This will be located above the cold-water intake. Clean the removable filter by swishing it around in some vinegar, then water, and then reinstall.


    Flush System

  5. Prepare the Vinegar, Submerge the Pump & Connect the Hoses
    Pour 3 gallons of standard white vinegar into your 5-gallon bucket. Submerge your pump and connect the hoses from the pump to the flush valves. Be sure to only run your pump when it is submerged or it may overheat. 

  6. Run the Pump for 90 Minutes
    Turn the pump on and let the vinegar circulate through for 90 minutes. The slight acidity of the vinegar is what breaks down the scale on the interior.

  7. Turn off the Pump & Disconnect the Hoses
    After 90 minutes, turn the pump off and disconnect the hoses. Cover the flush valve covers and close the flush valves.

  8. Double Check the Filter
    Check the filter once again to make sure it is clear.

  9. Turn the Water & Gas or Electric back on
    Open the cold and hot water valves. Open the gas valve or turn the electric back on. Gas tankless hot water heaters do not have a pilot light so you shouldn't have to worry about reigniting anything. 

  10. Mark Complete
    You’re done and have plenty of hot water available from your clean and clear heater for another year. Don't forget to mark this task complete on your dashboard! 
Download

Want to get started maintaining your home but not sure where to start? Download our free PDF of a typical home maintenance plan!

For a plan customized to your own home, register for Propsee Premium. 

Change Air Filters

Changing the air filter on your central heat and/or air system is one of the simplest and yet most important home maintenance tasks you can do. A clean air filter helps save energy, decrease dust and allergens, and extend the life of your system. This task usually takes just a few minutes and requires only basic tools and skills.

Read More

Flush Tank Water Heater

Tap water has tiny bits of minerals and sediment in it that tends to pile up in the bottom of your water heater. Left unchecked, this sediment builds up over time and will rob your heater of capacity and prematurely wear out the components. Eventually the whole bottom of your tank could rust out and lead to a catastrophic failure and flood. Annual water heater flushes help keep this from happening!

Read More